JOINTDEX
Components Out of scopeCRP Robot (Chengdu Crp Robot Technology)
CRP-DS500-P
Illustrative image · stagedCRP-DS500-P — 용접기 3/4 정면1 / 4

4 illustrative images · paging is being prepared.

成都卡诺普机器人技术股份有限公司 · CRP Robot (Chengdu Crp Robot Technology)

CRP-DS500-P

Out of scope · candidate · sources 3 · conflicts 1

두 매뉴얼이 정격 출력 전류를 다르게 말합니다. 어느 쪽도 고르지 않고 두 행을 모두 남겼습니다.

Judged not to be a humanoid part.

specs 9evidence 4sources 3sibling models 2conflicts 1
[price]Price is settled by the supplier's quotation
sibling models · same comparison table
CRP-DS500-PCRP-DS350-LCRP-DS350-SL
三相相数 · 상수
30–500 A额定输出电流 · 문서 A
30–350 A额定输出电流 · 문서 B

Saving to a BOM is being prepared.

Shipping · lead time[value]

Specs.

Every value sits on the same line as the sentence it was printed in and its source. Check before you order.

field · keyvaluesource sentencesourceEvidenceRetrieved · Changed
名称name
value
as printed 焊机용접기
source sentence名称 焊机
source[문서 제목 미확인] · NT-00125 · 6ed05417…pdf · p.17
EvidenceManufacturer claimed
Retrieved · Changed2026-08Changed
型号model
value
as printed CRP-DS500-PCRP-DS500-P
source sentence型号 CRP-DS350-L CRP-DS350-SL CRP-DS500-P
source[문서 제목 미확인] · NT-00125 · 6ed05417…pdf · p.17
EvidenceManufacturer claimed
Retrieved · Changed2026-08Changed
相数phases
value
as printed 三相3상
source sentence相数 三相 三相 三相
source[문서 제목 미확인] · NT-00125 · 6ed05417…pdf · p.17
EvidenceManufacturer claimed
Retrieved · Changed2026-08Changed
额定输出电流rated_output_current
value
30 至 500 Adocument A
30 至 350 Adocument B
충돌 · 미해결 · 검토 큐 — 아래 두 판독을 모두 보존합니다
source sentence
A30 至 500 A (与焊丝直径相关)
B30 至 350 A (与焊丝直径相关)
source
document A · WELDING MACHINE MANUAL · ff0c487a…pdf · p.20document B · [문서 제목 미확인] · NT-00125 · 6ed05417…pdf · p.17
EvidenceConflicting
Retrieved · Changed2026-08Changed
두 행 모두 유지 · 충돌 레코드 생성 · 고른 사람이 레코드에 남습니다
A 채택B 채택둘 다 유효
A person settles this in the review queue. Choosing is being prepared.
认证certification
value
as printed 符合 CCC 标准CCC 표준 적합
source sentenceCRP-DS500-P (符合 CCC 标准
source[문서 제목 미확인] · NT-00125 · 6ed05417…pdf · p.17
EvidenceManufacturer claimed
Retrieved · Changed2026-08Changed
specs 9, 5 shown

Where documents disagree, both rows are shown. You decide which way to go.

Source documents.

The specs were read from 2 documents, and 1 values differ between them. Read again every month.

2 documents
WELDING MACHINE MANUALPDF · ff0c487a…pdf · p.20Retrieved 2026-08
[문서 제목 미확인]PDF · NT-00125 · 6ed05417…pdf · p.17Retrieved 2026-08

3 sources are linked to this product; the specs were read from the 2 above.

Downloaddocument A · PDF · [file]document B · PDF · [file]Downloading the source file is being prepared.
1 under review
2026-08-25first collected · 3 sources
1 conflicts额定输出电流 — under review
next monthly re-survey2026-09-01

When a value changes, the previous value and its sentence stay beside it.

Build a joint around this part.

Judged not to be a humanoid part, so it is not compared against joints. The judgement is checked again every month.

Check joint combinations
JOINT · CRP-DS500-P · Out of scope
StatusNot applicable
  • Judged not a humanoid part — not compared against joints

To settle before a verdict

Supplier.

From the official WRC 2026 Beijing registry.

成都卡诺普机器人技术股份有限公司CRP Robot (Chengdu Crp Robot Technology)
WRC2026-C-042Hall CBooth C131CNcrprobot.com · official
This supplier's products on this screen 8Supplier page

2 sibling models from the same comparison table (CRP-DS350-L · CRP-DS350-SL). Other candidates with overlapping parameters are still being collected.

Keep this part in your BOM.

When the BOM opens, the value, its source sentence and its source page travel with the row. For now you can see all three in the spec table above.

See other parts

Saving to a BOM is being prepared.